Publish Time: 2020-10-22 Origin: Site
Why do we need a diesel leakage pipe?
How to install diesel leak off pipe?
The service life of diesel leak off pipe line
Keep in repair
In fact, the diesel leakage pipe can work many times per second. However, even if leak-free seals can be used, they will quickly wear out to a certain degree. Therefore, the key is to design a tight and easy-to-manage leak pipe. So if you use a leaking pipe, you can increase the tolerance and reduce the contact between metals, thereby reducing friction. It also reduces the susceptibility of the entire system to pollution, thereby extending the service life and increasing reliability. In this way, the problem is solved.
The installation of the diesel leakage pipe is generally very convenient and simple. Use the matching tools to install the connection point. Pay attention to the connection tightly to prevent air leakage and oil leakage. The whole process should also pay attention to the situation next to it. Met other things around. When installing a new pipe, do not use a wrench to tighten it too hard, otherwise it will easily damage the sealing ring in the pipe, resulting in poor sealing effect and no effect. It is similar to it. Remove the old diesel leakage pipe and be careful not to stain the inside of the machine with waste oil. Make sure not to bring dirt and other impurities into it. After filling with oil, apply oil on the sealing ring by hand to increase the sealing performance. If you can't figure it out, find a professional.
As we know, the function of the fuel and diesel leakage pipe is to extract excess gas from the carburetor and then return it to the fuel tank. In most cases, fuel and diesel leakage pipes are used when the vehicle is driving. So every leaking pipe has its service life. According to the expected conditions, the hose on the car can be used for 10,000 to 50,000 miles.
The first item is meticulous cleaning. When you take the pipe from the pipeline, you will expose the lungs of the engine. Any incoming contamination can cause serious damage. Diesel leakage pipes are installed in deep holes in the engine cylinder head, making this threat even more serious. When you remove the injector, dust and debris will fall from the well into the cylinder. Therefore, before performing any operations, check the entire engine with a clean cloth and household spray cleaner to remove as much dust as possible. After removing the diesel leakage pipe, you also need to clean the injector well. For this reason, if you do not have the correct cleaning accessories, you can connect a small hose to the end of a normal vacuum hose.
After cleaning the engine, turn off the engine to ensure that no fuel flows from the fuel distributor to the injector. Since some are usually connected to the fuel supply or return line, some may still drip from the leak pipe, so be prepared to catch any leaks. The next step is to remove the feed line and leakage line, and seal them with plastic and tape to prevent dust from entering. Later, it is time to remove it from the diesel engine leak pipe and it will be fixed to the engine or bolts or bolts and nuts.
If the function is normal, the diesel leak off pipe is a key part of the diesel engine and can provide you with many services. If you need more technical support, please feel free to contact our technical staff.